iPhone Apps

Stop typing captions until 11 p.m. in a motel after every storm deploy.

AdjustSnap turns the iPhone you already carry into an offline AI captioning tool, a LiDAR measuring tape, and a tamper-evident documentation engine — so you walk out of every property with a captioned, GPS-stamped, Xactimate-ready report. Built for independent adjusters at $29/mo, not $250.

The Problem

Sound familiar?

The nightly caption marathon

Shoot 80 photos per roof, drive to the hotel, then type captions into a laptop on bad Wi-Fi for two hours.

Cloud tools die in storm zones

After a hurricane there's no cell coverage, so sync-dependent apps freeze or fail when you need them most.

Rejected claim packets

Manual data entry drives 42% of claim rejections — inconsistent documentation costs you fees and rework.

Priced for firms, not for you

Encircle is $250/mo and Xactimate Mobile freezes with a three-second tap delay. Neither fits an independent's budget or workflow.

Before AdjustSnap AI
80 photos dumped into a 4,000-image camera roll
Two hours of caption typing every night in a motel
Cloud tools that stall the moment the signal drops
Measurements taped by hand and retyped later
Bare photos with no defensible location or time proof
After AdjustSnap AI
80 photos captioned on-device in about three minutes
Every photo GPS-stamped, timed, and hash-sealed
LiDAR measurements attached in a single tap
A finished report ready before you reach your truck
ESX exported straight to Files — no Xactimate retyping
Features

Everything you need

Offline AI photo captioning

Tap once and every inspection photo gets a damage-type, severity, and location caption — on-device in about three minutes, no signal needed.

Tamper-evident GPS chain

Every photo is stamped with GPS, timestamp, compass heading, and a SHA-256 attestation hash — defensible documentation for disputed claims.

LiDAR damage measurement

Drag across a damaged wall and get width, height, and area in one tap. Falls back to quick manual entry on non-LiDAR devices.

On-device field reports

Generate a preliminary report grounded only in your captioned photos and measurements — before you leave the property.

Xactimate-compatible export

Export a valid ESX or CSV file with line items and codes straight to Files or AirDrop. No retyping into Xactimate.

Works fully offline

Capture, caption, measure, and report in airplane mode. Backs up privately to iCloud only when you reconnect — never blocking field work.

Use Cases

Built for power users

Catastrophe (cat) adjusters

Clear 20 claims a week on a no-signal deploy without the unpaid evening admin.

Independent public adjusters

Out-document the carrier with a tamper-evident GPS + heading + hash chain that withstands disputes.

Restoration contractors

Capture water, fire, and interior damage in one offline pass with per-room LiDAR measurements.

FAQ

Frequently asked questions

Does it work without internet?

Yes. Captioning, LiDAR measurement, report generation, and export all run on-device. Your data backs up privately to your iCloud only when you reconnect — and sync never blocks field capture.

Which iPhone do I need?

AdjustSnap runs on modern iPhones. LiDAR measurement uses the Pro models' LiDAR Scanner; on other devices it falls back to fast manual measurement entry.

Can I export to Xactimate?

Yes. AdjustSnap generates a valid Xactimate-compatible ESX file (and CSV) with line items and codes that you can AirDrop or save to Files.

How is my documentation tamper-evident?

Every photo is sealed at capture with its GPS, timestamp, compass heading, and a SHA-256 attestation hash, so you can prove each photo's location, time, and authenticity in a dispute.

How much does it cost?

Solo is $29/mo and Pro is $49/mo (LiDAR + Xactimate export), with a 14-day free trial and no card required. Annual is $279/yr, and occasional adjusters can pay $4.99 per claim.

Walk out with the documentation done.

Join the waitlist to be first on AdjustSnap AI when it launches on the App Store.